Noise Health Home 

[View FULLTEXT] [Download PDF]
Year : 2005  |  Volume : 7  |  Issue : 28  |  Page : 51--60

Hearing protector performance and standard deviation

W Williams, H Dillon 
 National Acoustic Laboratories, Chatswood, New South Wales, Australia

Correspondence Address:
W Williams
National Acoustic Laboratories, 126 Greville Street, Chatswood, New South Wales, 2067

The attenuation performance of a hearing protector is used to estimate the protected exposure level of the user. The aim is to reduce the exposed level to an acceptable value. Users should expect the attenuation to fall within a reasonable range of values around a norm. However, an analysis of extensive test data indicates that there is a negative relationship between attenuation performance and the standard deviation. This result is deduced using a variation in the method of calculating a single number rating of attenuation that is more amenable to drawing statistical inferences. As performance is typically specified as a function of the mean attenuation minus one or two standard deviations from the mean to ensure that greater than 50% of the wearer population are well protected, the implication of increasing standard deviation with decreasing attenuation found in this study means that a significant number of users are, in fact, experiencing over-protection. These users may be disinclined to use their hearing protectors because of an increased feeling of acoustic isolation. This problem is exacerbated in areas with lower noise levels.

How to cite this article:
Williams W, Dillon H. Hearing protector performance and standard deviation.Noise Health 2005;7:51-60

How to cite this URL:
Williams W, Dillon H. Hearing protector performance and standard deviation. Noise Health [serial online] 2005 [cited 2022 Aug 8 ];7:51-60
Available from:;year=2005;volume=7;issue=28;spage=51;epage=60;aulast=Williams;type=0